Skip to main content

Mexico · 2024

3 mm Uprights for an Automated Warehouse in Mexico

An upright line for a stereoscopic warehouse, coil up to 3 mm, servo follow cutting. On a 12 m frame the tolerance that matters is straightness per metre.

See the machine
Market
Mexico
Delivered
2024
Customer
A racking manufacturer
Main machine
Rack Upright Roll Forming Machine

An upright line was loaded in February 2024 for a customer in Mexico. It produces uprights for a stereoscopic warehouse — an automated high-bay store — from coil up to 3 mm thick, under full PLC control.

Why an AS/RS needs a different upright

A stereoscopic warehouse, or AS/RS, stores pallets in a fixed grid that can run to 20 m or more and moves them with a stacker crane rather than a forklift. That changes what the upright has to do. It carries a much heavier load at the top of a much taller frame, and the beam levels have to be positioned accurately enough that the crane’s fork enters the pallet opening without touching the beam.

The tolerance that matters is straightness per metre of upright. On a conventional 6 m pallet rack, an upright out by a millimetre is a nuisance. On a 12 m AS/RS upright, the same millimetre puts the beam level out of position at the top, and the crane will not pick cleanly.

That is why an AS/RS upright is formed on a heavier line with more stations, rather than on a standard upright machine pushed to its limit. Pushing a standard line is not a derating exercise — the section does not get straighter because the machine is asked harder.

3 mm, and what it costs

Upright thickness up to 3 mm is the top of the standard range, and it is what sets the machine rather than the face width. A 3 mm Omega section needs a higher station count, a larger main motor, a stiffer frame and a heavier press than a 1.5 mm section, and the cutting force goes up with the square of the thickness.

The direction of that relationship is worth remembering: a line built for 3 mm runs 1.5 mm happily. A line built for 1.5 mm cannot run 3 mm at all. When specifying, quote the heaviest section you expect to sell, not the average — the average is what makes the quotation look competitive and the machine look wrong two years later.

The line

Decoiler, leveler, punch press, main roll forming machine, servo follow hydraulic cutting, run-out table and control box, fully automatic under PLC.

Servo follow cutting keeps the cut position in register with the punch pattern on every piece. On an AS/RS upright that matters more than on a conventional one, because the hole pattern is what the crane’s beam level is built from — a cut that drifts takes the reference with it.

Mexico as a market

Mexico has been adding warehouse capacity quickly, driven by nearshoring of manufacturing and by the growth of e-commerce distribution into the country. A good part of that new capacity is high-bay rather than wide-aisle, which is a different machine requirement from the one that built the older racking fleet.

For a plant moving from conventional racking into AS/RS work, the machine question comes before the sales question. If the line cannot hold straightness per metre at 3 mm, the project is not quotable — no matter what the crane supplier has promised.

The numbers

Strip
up to 3.0 mm
Frame height
12 m AS/RS
Cutting
servo follow
Loaded
Feb 2024

What was in the line

  • Rack Upright Roll Forming Machine

    Rack Upright Roll Forming Machine

    Rack Upright Roll Forming Machine (also called Omega-Racking Upright Roll Forming Machine) is used to produce rack upright for Warehouse Pallet Rack

    View machine

Servo follow hydraulic cutting; heavy build for 3 mm strip.

Tell us the profile and we will size the line

Section drawing, strip thickness, material grade and the output you need per shift — that is enough for us to come back with a machine specification and a price.

WhatsApp us