Case studies
Lines we have delivered
Each of these is a machine that was built, run on the customer's own strip and shipped. What the section was, what the constraint was, and what the line had to be to get there.
-
Seven Lines, Eight Containers: A Racking Plant in India
A racking manufacturer in India took the whole part mix at once — upright, bracing, angle, ZS beam and punching — in eight containers, loaded March 2025.
Rack Upright Roll Forming Machine → -
3 mm Uprights for an Automated Warehouse in Mexico
An upright line for a stereoscopic warehouse, coil up to 3 mm, servo follow cutting. On a 12 m frame the tolerance that matters is straightness per metre.
Rack Upright Roll Forming Machine → -
The Fifth Order: Two More Lines for a Vietnamese Plant
A Vietnamese racking manufacturer added a beam line and a support bar line — its fifth order from us. A repeat order is a different specification problem.
Rack Box Beam Roll Forming Machine → -
4,000 Bracing Pieces a Shift: Servo Follow Cutting in the US
A bracing line in a US workshop runs 480 V / 60 Hz and cuts on the move. Servo follow cutting is what separates 4,000 pieces a shift from 1,300.
Rack Bracing Roll Forming Machine → -
A Fully Automatic Upright Line in the Philippines
Decoiler to run-out as one sequence, a 100 t press ahead of the forming stands, and an acceptance run that measured the sample, not the demo.
Rack Upright Roll Forming Machine → -
A 90 × 70 Upright Line Running Since 2021
Two containers to Bangladesh in January 2020, uprights in production since early 2021, and no roll change beyond routine maintenance. What kept it running.
Rack Upright Roll Forming Machine →
Tell us the profile and we will size the line
Upright section, strip thickness, material grade and the output you need per shift — that is enough for us to come back with a machine specification and a price.





